How to 3D Print a Glock: A Complete and Easy Guide

3d printing a glock, or any firearm, is a controversial topic due to the potential of unregistered and untraceable weapons being produced.

However, for those who are interested in the process, it involves acquiring the design files for the glock model to be printed, obtaining the materials for printing (such as pla filament), and using a 3d printer to manufacture the gun in multiple parts.

Assembly and the addition of necessary components, such as the metal barrel and springs, would then need to be completed. It’s important to note that in many countries, the production and distribution of 3d printed firearms is illegal.

Building Your 3D Printer

3d printing is a revolutionary technology that allows you to create complex structures and designs with the help of a computer. However, before you can start printing, you need to have the right 3d printer and set it up correctly.

In this section, we will guide you through the process of building your 3d printer step by step.

Choosing The Right 3D Printer For The Job

Choosing the right 3d printer depends on the type of objects you want to print and your budget. Here are some things to consider when choosing the right 3d printer for the job:

  • Print speed: If you need your object to be printed quickly, consider a printer with higher print speeds.
  • Print quality: If you require high-quality prints, you need a printer with high resolution and accuracy.
  • Filament compatibility: Some printers only work with specific types of filaments, so check the printer’s compatibility with filaments before you buy it.
  • Budget: 3d printers vary in price, so make sure you know your budget before choosing a printer.

Assembling Your 3D Printer

Once you have chosen the right 3d printer for the job, it’s time to assemble it. Here are some general steps for assembling your 3d printer:

  • Unbox and organize the parts and hardware
  • Mount the frame and install the motors
  • Attach the belts and cables
  • Install the hotend and the extruder
  • Connect the electronics and power supply
  • Install the software and configure the printer

Calibrating Your 3D Printer For Accuracy

Calibrating your 3d printer is essential for achieving accurate prints. Here are the essential steps for calibrating your 3d printer:

  • Level the print bed to ensure the first layer adheres properly.
  • Calibrate the extruder steps to ensure the printer is extruding the correct amount of filament.
  • Adjust the flow rate and print temperature for optimal print quality.
  • Fine-tune the retraction settings to avoid stringing and other printing issues.

Building a 3d printer requires technical know-how and patience but following these steps will give you the best chance of achieving accurate prints. Happy printing!

Sourcing Materials

Required Materials For 3D Printing A Glock

Before embarking on the 3d printing journey to build a glock hand-gun, certain materials must be gathered. These include:

  • 3d printer
  • Polymer filament such as pla or abs
  • Glock barrel
  • Glock slide
  • Glock grip
  • Glock trigger assembly
  • Glock magazine

Recommended Materials For Optimal Functioning

While the required materials are necessary for building a glock, some additional materials can help improve its performance. These include:

  • Heat-resistant filament: A heat-resistant filament is useful in preventing the gun from melting or deforming during high-temperature conditions.
  • High-quality barrel: A high-quality barrel improves accuracy and reliability.
  • Additional components: Certain aftermarket components like enhanced firing pins and tuned triggers can enhance the overall performance of the gun.

Where To Source Materials

To successfully build a 3d printed glock, sourcing for materials from trusted and reliable sources is essential. Here are some sources to consider:

  • Glockstore: The official website for glock offers a wide array of original glock components.
  • 3d printer filament manufacturers: Reputable manufacturers such as hatchbox and esun offer high-quality filaments that can be used in 3d printing.
  • Other online marketplaces: Marketplaces such as amazon and ebay offer a range of glock components and filaments from different manufacturers.

Safety Precautions For Handling Materials

Safety should always be a top priority when handling materials for 3d printing. Some of the necessary safety precautions include:

  • Wearing gloves at all times to prevent filament contamination.
  • Handling the gun components with care to prevent damage.
  • Properly maintaining the 3d printer to minimize the risk of overheating and other hazards.
  • Following manufacturer instructions and guidelines to ensure safe handling of materials.

3d printing a glock requires specific materials and extra safety measures to ensure optimal functioning and safety. Taking time to source the required components from reputable sources is essential in guaranteeing that the resulting gun is accurate and reliable.


Preparing The 3D Printing Files

Choosing The Right 3D Printing File For Your Glock Model

Before beginning the process of 3d printing your glock, it’s essential to ensure that you have the right 3d printing file. Below are some factors you should consider when choosing the right 3d printing file for your glock model:

  • Compatibility: Ensure that the 3d printing file you choose is compatible with your glock model. You can easily find this information on the website where you downloaded the 3d printing file.
  • Accuracy: Check to see if the 3d printing file is accurate and up to date. The more accurate the file, the better the final product will be.
  • Complexity: The level of complexity of your glock model will determine the type of 3d printing file you need. For example, a simple glock model may require an stl file type, while a more complicated design may need a g-code file.

Modifying The 3D Printing File, If Necessary

Modifying the 3d printing file may be necessary, depending on your glock model’s complexity or your personal preferences. Here are some modifications you may need to make:

  • Scaling: You may need to scale the 3d printing file if you want to make the glock larger or smaller than the original design.
  • Orientation: The orientation of the 3d printing file can affect the overall quality of the final product. Proper orientation can minimize any deformities in the final product.
  • Supports: Adding supports to the 3d printing file can help maintain the model’s shape as it is printed.

Preparing The 3D Printing File For Printing

Once you’ve chosen the right 3d printing file and made any necessary modifications, it’s time to prepare the file for printing. Here are the steps you need to follow:

  • Slice the file: Slicing is the process of dividing the 3d printing file into layers and creating a set of instructions that tell the printer how to create each layer. You can use a slicing software like cura to slice your 3d printing file.
  • Set printing parameters: You’ll need to set the printing parameters based on the material you’ll be using. Parameters like temperature, speed, and layer height will affect the quality of the final product.
  • Add support structures: If you’ve determined that your 3d printing file needs support structures, you can add them using your slicing software. These structures will help maintain the shape of the glock model as it is printed.
  • Export the file: Once you’ve sliced and prepared the file, you can export it to the microsd card that you’ll use to operate the printer.

Preparing a 3d printing file for a glock model can be a complex process, but if you follow these guidelines and choose the right 3d printing file, modify it correctly, and prepare it for printing, you’ll end up with a quality final product.

3D Printing The Glock Frame

Setting up the 3d printer for the frame print:

Before getting into the actual printing process, it’s crucial to set up your 3d printer correctly. Here are the key points to keep in mind when it comes to setting up the printer:

  • Select the right filament material to achieve optimal results.
  • For printing a glock frame, use either abs or pla filament, which are most suited for firearms.
  • Ensure you have enough filament material available to complete the print job.
  • Use a high-quality 3d printer that can achieve high levels of print accuracy.

Printing the frame:

After setting up your 3d printer, it’s time to get started with the frame printing process. Here are the key points to keep in mind when it comes to 3d printing the glock frame:

  • Use a 3d model of the glock frame to print the frame, which can be obtained from various online sources.
  • Upload the 3d model onto your 3d printer software and make the necessary modifications to the settings.
  • Begin the 3d print process and wait for the printer to complete the print job.
  • Depending on your printer’s make and model, the printing process can take anywhere from a few hours to several days.

Post-processing the frame for optimal functioning:

Once the 3d printer has completed the glock frame, it’s essential to post-process the frame for optimal functioning. Here are the key points to keep in mind:

  • Remove all support structures from the 3d printed glock frame.
  • Sand the edges and surfaces of the frame, ensuring that any rough spots have been smoothed out.
  • Use acetone or sandpaper to refine the frame’s surfaces and remove any imperfections.
  • Clean or deburr the frame as necessary to ensure optimal functioning.

Testing the frame for accuracy and strength:

Finally, after the post-processing is complete, it’s time to test the glock frame for accuracy and strength. Here are the key points to keep in mind:

  • First and foremost, inspect the frame to ensure that there are no visible cracks or deficiencies.
  • Attach the necessary components to the frame to create a functioning glock firearm.
  • Test the frame’s accuracy and strength by firing the weapon.

By following these guidelines, you can achieve optimal 3d printing results for your glock frame. Remember that proper setup, printing, and post-processing are essential to ensuring the frame’s overall durability and strength.

3D Printing The Glock Slide And Barrel

Setting Up The 3D Printer For The Slide And Barrel Print

Before you begin, make sure you have all the necessary materials and equipment for the 3d printing process. Here’s what you need to do:

  • Choose the right 3d printer for the job based on the size and complexity of the slide and barrel models.
  • Install 3d printer software and configure the settings to match the material and printer type you are using.
  • Load the filament into the printer and feed it through the extruder.
  • Level the printer bed and adjust the z-height for the best adhesion and precision.

Printing The Slide And Barrel

Now that your printer is set up, it’s time to start printing the slide and barrel. Here are the steps you need to follow:

  • Download the 3d model files for the slide and barrel and import them into the 3d printing software.
  • Adjust the orientation and support structures for the models to ensure the best quality and strength.
  • Start the 3d printing process and closely monitor the printer for any errors or defects.
  • Once the print is complete, carefully remove the slide and barrel from the printer bed.

Assembly And Post-Processing Of The Slide And Barrel

Before you can test your 3d printed glock, you need to assemble the slide and barrel and finish any post-processing. Follow these steps:

  • Clean up any excess material and remove support structures from the slide and barrel prints.
  • Sand and polish the surfaces for a smooth and finished appearance.
  • Install and align the barrel and slide according to the manufacturer’s instructions.
  • Add any necessary finishing touches or customizations.

Testing The Slide And Barrel For Accuracy And Strength

It’s important to ensure that your 3d printed glock is safe and accurate before using it. Here’s what you need to do:

  • Take your 3d printed glock to a qualified gunsmith for testing and inspection.
  • Conduct several tests such as function checks, firing tests, and accuracy tests to ensure the slide and barrel are strong and accurate.
  • Make any necessary adjustments or modifications to the 3d printed slide and barrel before using the gun.

Remember, 3d printing firearms can be illegal in some jurisdictions and is considered a highly controversial topic. Ensure you check and comply with all relevant laws and restrictions before attempting to 3d print a glock or any other firearm.

Assembling Your 3D Printed Glock

Assembling a 3d printed glock can be a challenging but rewarding experience. Whether you’re an enthusiast or a professional gunsmith, these three steps will guide you through the process.

Installing The Frame

Here are the key points to keep in mind when installing the frame of your 3d printed glock:

  • First, ensure your printed frame is of high quality, free from any deformities or bubbles.
  • Once you have your lower frame assembly ready, start placing the internal parts carefully
  • Make sure to screw them in their suitable sections, and test them out with a dummy round.

Installing The Slide And Barrel

Follow these steps to install the slide and barrel in your 3d printed glock:

  • After finalizing the frame, attach the slide to the frame with care, ensuring that the rail blocks fit properly.
  • Insert the barrel into the slide according to the instructions, and make necessary adjustments if required.
  • Ensure that the only single bullet that you will use for testing should be a dummy one.

Installing The Trigger And Other Components

Follow these guidelines to install the trigger and other components in your 3d printed glock:

  • Attach the trigger, connector, and other components according to the standard process.
  • Ensure that everything including the pins and springs fits in their slots appropriately and are screwed correctly
  • Perform a visual inspection to ensure that the components are in their right order.

Testing The Function And Safety Of The 3D Printed Glock

After assembling the 3d printed glock, you need to test the function and safety of the weapon to check if everything is running smoothly. Here are the key things to keep in mind:

  • Perform a visual examination of everything to make sure that the weapon is properly assembled.
  • Use a dummy round to fire the weapon. If anything goes wrong, immediately disassemble and reassemble.
  • Finally, the best way to ensure everything is running smoothly is to test the weapon at a shooting range.

Use these steps as a guide to assemble your very own 3d printed glock. Remember to take your time and know what you’re doing. Stay safe and have fun!

Frequently Asked Questions Of How To 3D Print A Glock

Can You 3D Print A Glock?

Yes, it is technically possible to 3d print a glock, however, it is illegal to do so without proper licensing and permits.

Can You Legally 3D Print A Gun?

No, 3d printing a gun without proper licensing and permits is illegal in most countries, including the united states.

What Is 3D Printing?

3d printing is a process of creating three-dimensional objects using a digital file and a 3d printer.

Are 3D Printed Guns Reliable?

Most 3d printed guns are not as reliable as factory-made guns and can pose a safety risk to the user.

What Are The Risks Of 3D Printed Guns?

The risks associated with 3d printed guns include the potential for the weapon to malfunction or explode, as well as the fact that they are generally untraceable making them a potential threat to public safety.


Now you know how to 3d print a glock and the steps needed to do it. It’s important to note that 3d printed guns are controversial and illegal in some countries. Ensure that you’re complying with the laws and regulations in your area.

It’s always a good idea to consult with a legal professional before attempting to 3d print a gun. While the process may seem easy, there are safety and legal concerns to take into account. With advancements in 3d printing technology, it’s important to stay up-to-date on the latest regulations and guidelines.

As with any diy project, it’s important to weigh the risks and benefits before starting. By following the steps outlined in this article, you’ll be on your way to creating a 3d printed glock.


Perry Frank

Perry Frank

Leave a Comment